Race Spec
Export Portfolio
Featured Titanium Motorcycle & Performance Components
Each precision CNC component is manufactured from aerospace-certified Ti-6Al-4V Grade 5 bar stock to meet JIS, DIN, and custom race-team drawings across Ho Chi Minh City, Hanoi, and Da Nang.
Braking
Drivetrain
Flanged Hex
Cockpit
Precision
Custom EDC
Chassis Flat
Engineering White Paper
The Strategic Transition: Titanium Foot Pegs in Vietnam's High-Stress Two-Wheeler Ecosystem
Vietnam represents one of the dense motorcycle markets on earth, with over 72 million registered two-wheelers powering daily transit, courier logistics, and an aftermarket racing culture. For decades, OEM cast iron and die-cast A380 aluminum foot pegs have served as standard equipment on commuter underbones (Xe Máy) such as the Yamaha Exciter 155, Honda Winner X, and Suzuki Raider R150. However, commercial fleet operators, performance modification houses, and national racing teams face structural challenges: premature shear failure under aggressive cornering, thread stripping, and rapid galvanic corrosion caused by high humidity and tropical monsoon floods.
Velnora Titanium Industry Co., Ltd., based in Baoji—China's Titanium Valley—delivers custom OEM and ODM Grade 5 (Ti-6Al-4V / TC4) billet titanium foot pegs, cleat assemblies, and mounting brackets engineered specifically to address these mechanical failure modes. By replacing cast OEM foot pegs with 5-axis CNC-machined Grade 5 titanium, distributors and racing teams achieve a 44% reduction in unsprung mass while achieving a tensile strength exceeding 895 MPa, virtually eliminating catastrophic fracture during low-side track impacts and rock strikes.
- Elimination of Structural Porosity: Unlike cast aluminum pegs that harbor internal gas voids, our footrests are CNC-milled from solid aerospace-grade forged billet bar stock.
- High Modulus of Resilience: Grade 5 Titanium exhibits an elastic modulus of ~114 GPa, allowing pegs to absorb peak mechanical shocks during hard landings without permanent deflection.
- Self-Passivating Titanium Dioxide Film: Naturally forms a stable TiO₂ oxide layer resistant to atmospheric saltwater, acid rain, and road chemical runoffs.
Baoji Raw Material Provenance
Every batch of titanium bar stock processed at our Baoji precision facility is accompanied by genuine EN 10204 3.1 Mill Test Certificates (MTC). We verify chemical composition via vacuum direct-reading spectrometer (ensuring Fe ≤ 0.30%, C ≤ 0.08%, N ≤ 0.05%, H ≤ 0.015%, O ≤ 0.20%, Al 5.5-6.75%, V 3.5-4.5%) to guarantee no brittle phase transformations occur during extreme track conditions.
| Mechanical Metric | Ti-6Al-4V (Gr5) | 6061-T6 Billet | OEM Cast Iron |
|---|---|---|---|
| Density (g/cm³) | 4.43 (Optimized) | 2.70 (Lightest) | 7.85 (Heavy) |
| Yield Strength (MPa) | 828 – 895 | 276 | 250 – 350 |
| Tensile Strength (MPa) | ≥ 895 | 310 | 400 – 500 |
| Corrosion in Seawater | Immune (0.00 mm/y) | Pitting Susceptible | Severe Rusting |
| Fatigue Endurance (Cycles) | > 10⁷ @ 510 MPa | 10⁷ @ 96 MPa | Low Notch Toughness |
Localized Applications
Real-World Operational Scenarios Across Vietnamese Terrains
From commercial distribution in Chợ Tân Thành (Ho Chi Minh City) to extreme endurance trails in Hà Giang, our OEM/ODM titanium footrests solve localized durability and performance bottlenecks.
Underbone Track Racing (VMRC & Dai Nam Circuit)
The Vietnam Motor Racing Championship (VMRC) demands aggressive lean angles where foot pegs frequently make high-velocity contact with asphalt kerbs. Aluminum pegs sheer off at the mounting clevis, causing mechanical DNFs. Our Gr5 titanium pegs feature replaceable sacrificial titanium slider pucks and high-traction CNC cleats that resist abrasion, generate zero catastrophic snap, and provide tactile grip even when drenched in premix fuel and rain.
Underbone 150cc / VMRC SpecCoastal Monsoon & Salt Air Corrosion Resistance
In coastal provinces such as Hải Phòng, Đà Nẵng, Nha Trang, and Vũng Tàu, atmospheric salinity combined with seasonal tropical downpours corrodes conventional chrome-plated steel hardware within weeks. Our titanium foot peg assemblies, equipped with Grade 5 titanium pivot pins, torsion return springs, and cotter clips, exhibit zero rust or micro-pitting, preserving structural integrity for coastal commercial fleets and rental fleets.
Coastal Coastal ProvincesHard Enduro & Adventure Touring (Hà Giang & Tây Nguyên)
Navigating the jagged limestone tracks of Hà Giang, Sa Pa, or the red basalt mud of the Central Highlands requires footrests that shed heavy clay while withstanding high-impact boulder impacts. Velnora designs ODM wide-platform titanium enduro pegs with open-core mud-clearing discharge channels and precision wire-EDM outer teeth that prevent boot slippage under torrential tropical mud conditions.
ADV & Hard Enduro TouringThe Shift to Billet Customization
Vietnamese powersports consumers are moving away from inexpensive cast replicas toward high-status, genuine titanium components. Distributors in Hanoi's Phố Huế and HCMC's District 5 report that riders actively demand physical proof of Grade 5 titanium, anodized iridescent colors (burnt blue/purple), and custom laser-engraved brand signatures on billet hardware.
Vietnam Market Growth Highlights (2024–2030)
- • Premium Underbone Segment: Over 18% annual growth in titanium hardware retrofits among Exciter and Winner X modification communities.
- • Maxi-Scooter & Big-Bike Adoption: Rapid expansion of Honda SH350i, Forza, and adventure middleweights (CB500X, Transalp) demanding custom foot controls.
- • Wholesale Private-Label Demand: Tier-1 accessory distributors seeking direct Baoji OEM partnerships to bypass regional trading middlemen.
Market Dynamics
Market Evolution: Strategic Trends Driving Titanium Demand Across Vietnam
The motorcycle accessory sector in Vietnam is experiencing a profound paradigm shift. Historically driven by low-cost die-cast parts, the market has matured rapidly due to higher disposable incomes, the proliferation of motorsport clubs, and a surging enthusiast culture known as "Độ Xe". Vietnamese riders view foot controls not merely as functional footrests, but as critical contact points that communicate chassis feedback and define the visual stance of the machine.
Key localized trends our OEM/ODM export division is currently catering to include:
- Aesthetic Anodizing & Thermal PVD Coatings: Vietnamese enthusiasts favor brilliant burnt-blue, gold, and oil-slick rainbow finishes created through automated micro-arc anodic oxidation that will not peel or fade under harsh equatorial UV sunlight.
- Adjustable Multi-Angle Rear-Sets (Bộ Số Gãy): Track-day riders and street-drag competitors require CNC adjustable mounting brackets allowing variable peg placement (+15mm to -25mm) to tune ergonomics for high-speed aerodynamics.
- Integrated Anti-Vibration Damping: Due to continuous high-RPM running on long single-cylinder commutes, our ODM foot peg designs integrate hidden fluoroelastomer dampers that attenuate 7,000+ RPM secondary engine harmonics.
Enterprise Advantages
Why Southeast Asian Importers Rely on Velnora Titanium
Founded in 2013 in the epicenter of global titanium metallurgy, Velnora Titanium Industry Co., Ltd. bridges raw metallurgical mastery with agile, high-precision CNC manufacturing.
01
Baoji Titanium Valley Hub
Direct supply-chain integration with certified titanium sponge smelters gives us raw material priority, ensuring uncompromised Grade 5 purity, stable pricing, and zero third-party material markups.
02
5-Axis CNC & Wire EDM
Equipped with advanced 5-axis DMG MORI and brother machining centers alongside ultra-precision wire EDM machinery, holding tolerances within ±0.015mm for flawless clevis pin fitment.
03
Full OEM/ODM Prototyping
Rapid CAD/CAM engineering turning customer 2D sketches, 3D STEP files, or physical OEM foot peg samples into functional production-grade prototypes within 7 to 10 working days.
04
Real-Time Production Video
We eliminate cross-border uncertainty. Our project managers broadcast live machining, threading, and anodizing videos directly to clients prior to dispatch, ensuring 100% transparency.
05
Exacting Quality Assurance
Every batch undergoes optical projector thread verification, Rockwell C hardness testing, dye penetrant inspection for surface micro-fissures, and continuous CMM dimensional control.
06
Seamless ASEAN Logistics
Extensive experience with shipping documentation for Vietnamese customs clearance via Hai Phong Port or Noi Bai / Tan Son Nhat air express, with complete Certificate of Origin (CO) support.
Procurement FAQ
Frequently Asked Questions by Vietnamese Buyers
Clear, definitive technical answers addressing customs, material integrity, surface durability, and order quantities for commercial distributors.
How do you verify genuine Grade 5 Ti-6Al-4V versus counterfeit Grade 2?
We supply a verified EN 10204 3.1 chemical and mechanical inspection certificate with every shipment. Commercially pure Grade 2 titanium lacks the required tensile strength (≈345 MPa vs Gr5 ≥895 MPa) and will bend during cornering. Our material is spectroscopically tested to confirm ~6% Aluminum and ~4% Vanadium alloy composition before CNC turning begins.
What is the typical Minimum Order Quantity (MOQ) for custom foot peg designs?
For custom ODM/OEM designs requiring dedicated CNC fixturing and tooling, our standard MOQ is typically 50 to 100 pairs per specification. For standard production items or existing tooling profiles, sample orders and pilot runs starting at 20 pairs can be accommodated to facilitate local market validation.
Will the anodized color hold up under Vietnam's equatorial UV and rain?
Yes. Titanium anodization does not use organic dyes or pigments; instead, it generates a transparent titanium oxide (TiO₂) layer that produces interference colors via light refraction. Because there is no chemical dye to degrade under UV light, colors such as burnt blue, bronze, and purple will not fade or peel, maintaining brilliance through years of monsoon exposure.
How do you prevent thread galling on titanium mounting hardware?
Titanium-to-titanium or titanium-to-aluminum contact can generate galling if torqued dry without proper lubrication. All Velnora mounting hardware features precision CNC rolled threads (which create smooth, burnished surfaces compared to cut threads), and we recommend using an anti-seize paste with reduced friction coefficients during final assembly.
What documentation do you provide for customs clearance into Vietnam?
We provide full commercial documentation including detailed Packing Lists, Commercial Invoices with correct HS Code classifications (typically 8714.10 for motorcycle parts and accessories), Airway Bills (AWB) or Ocean Bills of Lading, and Certificate of Origin (CO Form E when requested) to support preferential tariff processing under ASEAN trade frameworks.
Can you manufacture foot pegs with custom laser-engraved branding?
Absolutely. We provide comprehensive private-label OEM services. Using high-precision fiber laser marking systems, we can engrave your company logo, batch serial numbers, racing team badges, or localized model designations directly onto the billet surface prior to final ultrasonic cleaning and packaging.
Ready to Elevate Your Titanium Foot Peg Inventory?
Connect directly with our Baoji engineering sales desk. Send us your sample photos, 2D/3D technical drawings (STEP, IGES, PDF), or target vehicle models. Our metallurgical engineers respond within 4 hours with comprehensive DFM feedback and competitive wholesale quotations.